2024 © Brett Productions Ltd
The Dampchaser® should be installed in accordance with the manufactures mounting instructions and should NOT be operated in the immediate vicinity of a bath, shower or swimming pool, or be mounted immediately below or in front of a power outlet socket.
The Dampchaser® is a highly reliable product and contains no serviceable parts. If the supply cord is damaged it must be replaced by the manufacturer or a similarly qualified person in order to avoid a hazard.
The Dampchaser® is not intended to be used by young children or the infirm unless adequately supervised by a responsible person. Young children should be supervised to ensure they do not play with the appliance
Mounting
The Dampchaser® must be mounted horizontally on a wall; (four screws are provided) with the ventilation grills facing up and down. Either way round is OK.
Allow a minimum clearance of 100 mm or 4 inches of free space above and below to allow good air flow through the Dampchaser®. For maximum efficiency mount the Dampchaser® in the lower half of the cupboard to allow rising heat to circulate.
The Dampchaser® may be left running continuously and can be cleaned occasionally by applying a vacuum cleaner to the heater grill and wiping with a cloth.
WARNING, DO NOT COVER or mount vertically as over heating may ocure. It is normal for the top and front to be hot to the touch.
Operating Instructions and Cautionary Notes
100 & 60 Watt Models with
Auto. reset over temperature switch
Please Read Before Use
100 & 60 Watt Models with
Auto. reset over temperature switch
Please Read Before Use
